Home Hub 1.0 and 1.5 Wi-Fi (802.11 b/g) Fast Ethernet USB 1.1 Home Hub 2.0 Wi-Fi (802.11 b/g/n) Fast Ethernet USB 2.0 Home Hub 3 Wi-Fi (802.11 b/g/n) Fast Ethernet Gigabit Ethernet USB 2.0 Home Hub 4 Wi-Fi (802.11 a/b/g/n) Fast Ethernet Gigabit Ethernet USB 2.0 Home Hub 5 Wi-Fi (802.11 a/b/g/n/ac) Fast Ethernet Four Gigabit Ethernet ports One USB 2.0 connector Smart Hub Wi-Fi (802.11 a/b/g/n/ac) Fast Ethernet Four Gigabit Ethernet ports One USB 3.0 connector Home Hub 2.0 18.2 cm (7.2 in) (h) 17.5 cm (6.9 in) (w) 8.8 cm (3.5 in) (d) Home Hub 3 11.0 cm (4.3 in) (h) 18.5 cm (7.3 in) (w) 4.0 cm (1.6 in) (d) Home Hub 4 11.6 cm (4.6 in) (h) 23.6 cm (9.3 in) (w) 3.1 cm (1.2 in) (d) The BT Smart Hub (formerly the BT Home Hub) is a family of wireless residential gateway router modems distributed by BT for use with their own products and services as well as wholesale resellers i.e. The latest versions of the Home Hub support the Wi-Fi 802.11ac standard, in addition to the 802.11b/g/n standards.
All models of the Home Hub prior to the Home Hub 3 support Vo IP Internet telephony via BT’s Broadband Talk service and are compatible with DECT telephone handsets.
BT Home Hub 5 "Forced Firmware Upgrade" July 2017 is causing me problems.
WARNING - BT Home Hub 5 "Forced Firmware Upgrade" July 2017 is NOT seamless / invisible - you MUST do a full BT Home Hub 5 power off disconnect reset AFTER the forced firmware upgrade.
I know for 100% that both of my Home Hub 4A did its reboots every 14 days no matter how stable your connection was.
Going by what's been posted on here and the BT Forums and who I have spoken to at BT they all have the reboot issue and its does that for stability (so BT tell me), maybe phusnet does something different, who knows.
Not too sure if the Smart Hub does the same 14 day reboot, I know it has done a couple of reboots, but that was for firmware updates and all the other updates was me doing loads of reboots for various reasons.
At this current time mines been connected for: The rebranding "might" also remove the reboot.
The Hub has selected the Channel 11 automatically that works well for my home wireless connection.
My question is how could I get the Home Hub-3 to remember the selected channel without me in the morning to refresh the setting on a daily basis?
[I have tried by selecting the "Apply" and a green circle with a tick to denote that the change had taken place] Home Hub-3 current firmware Version 184.108.40.206.83.8.45 [Type A] and I noticed a new one available and How could I update mine to the latest?
In this guide we'll show you how to change your router’s settings from the annoying defaults to more effective ones, and alter advanced settings to get the most out of your home Wi-Fi network.
And if you've got the new BT Smart Hub instead, then we've got you covered too, head over to our BT Smart Hub settings guide now.